ER collet chucks handle a wide range of machining
jobs without having to buy new tool holders. Simply
choose the right size
collet for the job,
set tool depth, and tighten the collet nut to the
proper torque using a
torque wrench and
tightening fixure.
|
Voted Best Collet Chuck on the Market!
• Balanced to 25,000 RPM at G2.5
• 0.0001" runout from taper to pocket
• Individual lab certification included
Techniks tool holders are manufactured to the
highest possible standards to extend perishable cutting
tool life and improve CNC machine performance.
Collets are available for: drilling, milling,
coolant thru, and high-speed applications. Special “DNA”
Dead Nuts Accurate collets are used for small
drills (6mm and smaller) to maintain T.I.R. at those
sizes.
Use "Power
Coat" nuts to increase the holding power and safety
of your tool holders. High holding power extends cutting
tool life and improves surface finish.
Refer to the chart below to order HSKA ER collet
chuck tool holders.
See bottom for Coolant Pipe and wrench ordering
information.
|
HSK32A, HSK40A, HSK50A, HSK63A,
HSK100A, ER Collet Chuck Tool Holders
Note: ER 16 and ER 20 tool holders come
with hex nut standard. For slotted nuts simply ad
SLOTNUT to the end of the part number.
|
Part No.
|
Description
|
d1
|
I1
|
I2
|
Wrench
|
|
90.05.008.002
|
HSK 32A x ER 20-80
|
34mm
|
80mm
|
60mm
|
04610 hex
|
|
90.05.008.003
|
HSK 32A x ER 25M
|
35mm
|
80mm
|
60mm
|
04624
|
|
91.05.008.002
|
HSK 40A x ER 32-80
|
50mm
|
80mm
|
60mm
|
04616
|
|
92.05.008.003
|
HSK 50A x ER 32-100
|
50mm
|
100mm
|
74mm
|
04616
|
|
93.05.008.160
|
HSK 63A x ER 16-80
|
28mm
|
80mm
|
54mm
|
04609 hex
|
|
93.05.008.004
|
HSK 63A x ER 16-100
|
28mm
|
100mm
|
74mm
|
04609 hex
|
|
93.05.008.104
|
HSK 63A x ER 16-160
|
28mm
|
160mm
|
134mm
|
04609 hex
|
|
93.05.008.105
|
HSK 63A x ER 20-160
|
34mm
|
160mm
|
134mm
|
04610 hex
|
|
93.05.008.006
|
HSK 63A x ER 32-100
|
50mm
|
100mm
|
74mm
|
04616
|
|
93.05.008.008
|
HSK 63A x ER 40-80
|
63mm
|
80mm
|
54mm
|
04617
|
|
93.05.008.007
|
HSK 63A x ER 40-120
|
63mm
|
120mm
|
94mm
|
04617
|
|
95.05.008.008
|
HSK 100A x ER 16-100
|
28mm
|
100mm
|
74mm
|
04609 hex
|
|
95.05.008.010
|
HSK 100A x ER 32-100
|
50mm
|
100mm
|
71mm
|
04616
|
|
95.05.008.011
|
HSK 100A x ER 40-120
|
63mm
|
120mm
|
91mm
|
04617
|
Coolant Pipe and Wrench for HSK A
Coolant Thru Applications
|
Part No.
|
HSK-A
|
d
|
G
|
Wrench
|
 |
|
|
|
